Quality Flooring Contractor in Coral Terrace FL - Durable Floors on Well-Prepped Slabs
Stonegate Epoxy Floors of Coral Terrace coats garage floors and concrete slabs in Coral Terrace, Westchester, Coral Gables and the cities around them. We also resurface pool decks that take hard sun and heavy rain, and restore old terrazzo floors.

- Fully licensed and insured.
- Free quotes on site.
- Replies within 1 business day.
Stonegate Epoxy Floors, a flooring contractor in Coral Terrace FL
I spent years at an office desk before I learned concrete and coatings under an experienced installer, and then I started Stonegate Epoxy Floors. We're a fully licensed and insured flooring contractor, best known for the slow work nobody sees, testing and prepping a slab before anything goes on it, because that's where a floor holds up or lets go.
We're based in Coral Terrace and work in the cities listed below and others around them. Call (305) 786-6170 or use the form on our contact page to reach us, and you can read how I got into floors on our about page.
- Your floor tested first
- A clear written scope
- The owner on every job
Concrete floors we coat, polish and repair
Stonegate Epoxy Floors of Coral Terrace is the flooring contractor for concrete that's stained, cracked or slick, from garage floors and pool decks to shop floors. Price follows the slab's size, condition and prep, the schedule follows repairs and cure time, and our free quote on site gives your figure.
- Learn more about Epoxy Floor Coatings
Epoxy Floor Coatings
We roll an epoxy coating over prepped concrete in garages, laundry rooms and slab rooms, so you get a hard floor with no grout lines that wipes clean.
- Learn more about Commercial & Industrial Epoxy Floor Coatings
Commercial & Industrial Epoxy Floor Coatings
Running a warehouse, shop or commercial kitchen? We put down epoxy systems built for forklifts, carts and spills, and we work out the schedule around your hours.
- Learn more about Garage Floor Coatings
Garage Floor Coatings
Hot tires peeling the paint off your garage floor? We grind the slab and lay a flake coating built to handle tires, oil and dropped tools.
- Learn more about Polyaspartic Floor Coatings
Polyaspartic Floor Coatings
Polyaspartic is a fast-curing coating that holds its color in sunlight, so it suits garages that sit open to the street and floors you need back quickly.
- Learn more about Metallic Epoxy Flooring
Metallic Epoxy Flooring
We pour metallic epoxy with pearl pigments that swirl and shift in the light, for living areas, showrooms and bars where the floor is the feature.
- Learn more about Urethane Cement Flooring
Urethane Cement Flooring
Need a floor that takes boiling water, freezer cold and daily washdowns? Urethane cement is the heavy-duty choice for commercial kitchens, breweries and food plants.
- Learn more about Polished Concrete Flooring
Polished Concrete Flooring
We grind your existing slab with finer and finer diamonds and harden it with a densifier, leaving a glossy floor with no coating to peel.
- Learn more about Stained Concrete Flooring
Stained Concrete Flooring
Stained concrete soaks color into the slab itself, giving patios, slab rooms and shops a marbled or solid tone that wears with the floor instead of flaking.
- Learn more about Terrazzo Flooring
Terrazzo Flooring
Old terrazzo dull, chipped or hidden under carpet? We repair the cracks, grind and polish it, then seal it so the marble chips show again.
- Learn more about Basement Flooring
Basement Flooring
Rooms below ground or on low slabs deal with moisture from underneath, so we test the concrete before picking a coating that can handle it.
- Learn more about Concrete Grinding & Surface Preparation
Concrete Grinding & Surface Preparation
Every coating needs a clean, open surface to grip, so we diamond-grind the slab, fill cracks and pull old sealers before anything goes down.
- Learn more about Concrete Sealing
Concrete Sealing
A clear sealer keeps water, oil and stains out of driveways, patios and pool decks, and it's the simplest way to protect bare concrete.
- Learn more about Concrete Resurfacing & Overlays
Concrete Resurfacing & Overlays
Flaking, patched or stained concrete doesn't always need tearing out, because a thin cement overlay over the old slab gives you a fresh, even surface.
- Learn more about Self-Leveling Concrete & Overlays
Self-Leveling Concrete & Overlays
We pour a cement that spreads and flattens itself over uneven slabs, giving tile, wood, vinyl or a new coating a flat base to sit on.
- Learn more about Pool Deck Coatings & Resurfacing
Pool Deck Coatings & Resurfacing
Pool deck hot, slick or cracking? We repair the concrete, then resurface or coat it with a textured finish that gives bare feet more grip.
- Learn more about Concrete Floor Stripping & Removal
Concrete Floor Stripping & Removal
Before a new floor goes down, we grind and scrape off old epoxy, paint, tile adhesive or carpet glue and leave you clean concrete.
Request an estimate
Get started
Why people choose Stonegate
A coated floor holds up or lets go at the concrete under it, so I spend the time there first. You also get straight answers before we start, including the parts nobody can promise.

A finish matched to your slab
We check your concrete for moisture, cracks and old sealers before we suggest a coating, so the finish you pick suits the floor it's going on.
A scope you can compare
Your written scope spells out the prep, the product and each step, so you can line it up fairly against other bids.
Permit questions sorted early
We find out which office covers your address before work starts, and for most of Coral Terrace that's Miami-Dade County. If a permit's needed, we apply.
From your first call to a finished floor
Estimates are free, done on site and come with no obligation, because I'd rather see your floor and answer your questions than guess at it over the phone.
Call or send the form
Call (305) 786-6170 or send the form with a few lines about your floor, and we'll get back to you within one business day.
I look at the floor
I come out myself to look at the concrete, test it where it needs testing and answer every question you have, however many that is.
Your written scope
I write up a scope that says what prep we'll do, which product goes down and each step after that, so nothing about the job is a guess.
Prep, install, walkthrough
Our crew preps the concrete and puts the floor down with me on site, and I walk the finished floor with you before we pack up.
Questions about a step? Call and talk it through.
(305) 786-6170Where we work from Coral Terrace
From Coral Terrace, we work in the cities listed below and plenty of others around them. Choose yours to see what we find there, or call (305) 786-6170 if it isn't listed.
Examples of finished concrete floors
Look through these examples of epoxy, polished concrete and terrazzo floors to get a feel for the finishes before we talk about yours.
Questions people ask about concrete floors
How much does an epoxy garage floor cost in Coral Terrace?
It depends mostly on the size of the garage, how much repair and grinding the slab needs and which coating system you choose, so we give you a figure after seeing the floor. Cracks, old paint and moisture all add prep, and a full flake system costs more than a single color coat. The quote is free and done on site.
Why do epoxy floor quotes vary so much between contractors?
Most of the difference comes from the prep and the product, not the shine you see on the first day. A bid that skips grinding or uses a thin coat costs less up front, which is why our written scope spells both out so you can compare.
How long does a garage floor coating take before I can drive on it?
That depends on the product's cure time and how much prep the slab needs, so we'll tell you the wait for your floor when we write up the job. Polyaspartic coatings usually let you back on sooner than epoxy, and the coating maker's cure instructions decide when the car goes back in.
Is Stonegate Epoxy Floors licensed and insured in Florida?
Yes, we're fully licensed and insured. In Florida, a certified contractor license covers work anywhere in the state, while a registered license covers only the cities or counties where the holder has a local certificate of competency, and Miami-Dade County licenses contractors who work in the county.
Why does concrete need grinding before an epoxy coating?
Grinding opens up the surface and takes off old sealers, paint and weak concrete, so the coating has something solid to grip. Without it, a coating usually just sits on top and can peel, which is why we treat concrete grinding and surface preparation as the main part of the job.
Do you guarantee your epoxy floor coatings?
Our work is backed by our satisfaction guarantee. Before we start, I'll also tell you plainly what nobody can promise, such as a crack in the slab showing back through the coating if the concrete keeps moving.
Is epoxy or polyaspartic better for a garage in Miami?
For most garages here, I lean toward a polyaspartic topcoat, because it cures quickly and holds its color in sunlight, while plain epoxy can turn yellow in sun through an open door. Epoxy still makes a good base coat, and the right pick depends on what your slab shows when we test it.
Does groundwater affect concrete floors in Coral Terrace?
It can, because the county sits close to sea level with groundwater just below the surface, so moisture can push up through a slab and lift a coating that isn't made for it. That's why we test slabs that need it and pick a product that suits what we find.
Get a free floor estimate in Coral Terrace
Tell us about your floor, roughly how big it is and what's wrong with it, and we'll reply within one business day. I'll then set up a time to come look at it, free and with no obligation.
